hock-absorbing Anti-glare Film Set for iPhone 7 Plus

Shock-absorbing Anti-glare Film Set for iPhone 7 Plus

×
×
Price:
$16.95
SKU:
PBK-08
Availability:
Usually ships in 1 to 2 business days.
Quantity:
Description
Reviews
Related Products
Product Videos
Warranty
Also Viewed
By Category
Other Details
  • Product Description

    Shatter proof protection with Power Support’s Shock-absorbing Anti-glare™ Film Set for iPhone 7 Plus. Six shock absorbing layers shield your iPhone screen form bumps, drops, and hits while reducing glare and hot-spots. Engineered and produced in Japan our film absorbs and dissipates glass shattering shocks to your iPhone’s screen. Hard screens like tempered glass may resists scratches but its brittle nature makes it unable to resists shocks causing cracks and breaking. In Iron Ball Drop Tests a 110 g iron ball was dropped 1.5 meters directly onto a glass screen protected by the Shock-absorbing Anti-glare™ Film with no cracks or damage to the glass. Our anti-glare film dramatically reduces screen glare and hotspots from the sun and harsh interior lighting, giving you a clear view of the iPhone screen. The AFP hard, outer coating incorporates a new anti-fingerprint coating specifically developed to improve surface responsiveness, repel water and oil while protecting against scratches, dirt and dust. The anti-fingerprint coating does not prevent finger prints, but, unlike inexpensive screen films, oils and dirt from your fingers do not adhere or penetrate the surface making the screen easy to clean. The AFP coating also resists most common oils and compounds found in make-up, body lotions, cooking and industrial settings.

    Six layers of protection.

    shock-absorbing-film-layers-labled.jpg

    Easy to Apply

    Unlike some screen films that require an elaborate and messy application process or a special applicator operated by store personnel, Power Support’s Shock-absorbing AFP Crystal Film™ Set for iPhone 7 is easy to apply by yourself! Our Rip In Place (RIP)™ screen protector application technology (see instructions below) makes it easy to apply the film. Our film is not “glued” to the screen, but clings. This makes it easy to remove and re-attach the film or remove unwanted lint and dust during application.

    The Shock-absorbing AFP Crystal Film™ Set for iPhone 7 clearly protects your screen’s surface from scratches, dirt and shocks while enhancing the image.

    Features:

      • Shock-absorbing & Shatter Proof
      • 0.4 mm thin
      • Anti-fingerprint
      • Scratch Resistant
      • Responsive
      • Prevents glare from sun and interior lighting
      • Easy to apply with Rip-In-Place™ technology

     Set includes:     

      • 1 Shock-absorbing anti-glare film
      • 1 Micro fiber cleaning cloth
      • 1 Dust Remover

     

    Rip In Place (RIP)™ screen protector application

    Our Rip In Place (RIP)™ screen protector application technology is designed to help you cleanly and accurately apply the screen protector. You will notice there are two notches in the film's backing. This backing has been molecularly designed to rip in a straight line and produce no dust or fine particles. Now you can line up the screen protector and secure it in place before attaching the entire film on to the screen.

    Always attach new Power Support screen protector film in a clean, dust free environment. 

    rip-1.jpg

    Using the provided cloth, carefully remove dirt and dust from the iPhone screen surface.

    rip-2.jpg

    Remove the backing from the Dust Remover and apply the sticky side to the iPhone glass surface. Peel off the Dust Remover and lift off residual dust and dirt from the glass screen.

    rip-3.jpg

    Pick up the film and find the two cuts or notches along the side of the film backing. 

     

     

    rip-4.jpg

    Remove the center portion of the film backing from the film to expose the adhesive.

    rip-5.jpg

    Placing the adhesive side down align the film with the screen surface and slowly apply the center portion of the film onto the iPhone glass.

     

     

    rip-6.jpg

    While holding down the center portion of the film, slowly remove the upper portion of the film backing while applying the film to the iPhone glass surface. 

     

     

    rip-7.jpg

    Finally, while holding down the upper portion, slowly remove the lower film backing and apply the remainder of the film to the glass surface. Press out any air bubbles as you proceed. 

     

     

     

     

     

     

     

     

    Trapped dust and air bubbles

    Trapped air bubble can be gently pushed to the edge of the film with your fingers and the included micro fiber cleaning cloth. Most bubbles will work themselves out in 24 to 48 hours.

    Trapped dust and dirt particles can be removed by lifting up the corner of the film closest to the dust speck. Use the enclosed film remover or use a piece of tape, such as scotch tape. Press the tape on the top of the film and carefully lift. Using another piece of tap lift the dust up off the screen or the back of the film.

    rip-8.jpg

    To remove the film, slide the separately included film remover between the screen protector and the iPhone screen, lift and remove the screen. You may need to try different corners till you find one that you can lift.

    If you no longer have the film remover you can use a small piece of scotch tape. Press the tape to the top surface of the film in one corner and slowly pull up. 

  • Customer Reviews

    ×

    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

    Independent feefo Reviews

  • Warranty Information

    If this product fails due to manufacturing defects it is covered under the Power Support Warranty for three months from the date of purchase.

  • Find Similar Products by Category

  • Other Details

    Compatibility: iPhone 7 Plus
    Type: Screen Film
    Film Type: Shock Absorbing, Anti-Glare
×
×
-->