Apple continues the tradition of beautiful, high technology devices with the iPhone 7. The design and the colors of the iPhone 7 are just as compelling as the technical achievements. That is why Power Support designs our distinctive Air Jacket cases to protect the iPhone without distracting from it beauty and design. Specifically designed for Apple, the new Air Jacket™ is made from an ultra-thin poly-carbonate shell with a self-healing coating to ensure that your phone stays protected and that your case maintains its original crystal clear, clean look. Unlike many cases that only cover three sides of the iPhone 7 our Air Jacket™ case totally encompasses all four sides to guarantee full protection for the device. This provides a clean, tight fitting case that hugs your new iPhone 7 that protects while showing off your device. All buttons are easily accessible because of the case's extreme thinness and because of the amazingly precise manufacturing.
Our Air Jackets are known for their extreme thinness, clarity and strength. When our clear Air Jacket is on an iPhone it disappears, highlighting the stylish beauty of the iPhone and not the case. Our new Air Jacket is just as clear, thin and tough but a bit more pliable. We understand that the Air Jacket’s exact fit and the shape of the iPhone’s sides may make the Air Jacket difficult to remove. We have listened to your concerns and so the new material has just enough give to make removal a bit easier. In addition the open cut-out around the lighting connector, and the slight indentions around the bottom corners will make it easier to remove the Air Jacket from the iPhone 7.
Raised Camera Lens
The new iPhones have amazing cameras with high technology lenses. The problem is that in order to accommodate all that technology the camera lens is raised on the back of the phone. When you lay your iPhone down it rests ON THE LENS! Would you lay your Nikon on its lens? Plus the phone rocks and is not stable when you lay it down. The cut out for the camera lens in our Air Jacket eliminates this problem. Feel free to lay your iPhone 7 down anywhere when it is in our Air Jacket.
New Jet Black Finish
What a gorgeous looking phone! That high-gloss finish is achieved through a precision nine-step anodization and polish process. However, according to Apple’s web site, “its high shine may show fine micro-abrasions with use. If you are concerned about this, we suggest you use one of the many cases available to protect your iPhone.” With the Clear Air Jacket for iPhone 7 the Jet Black finish will look just as amazing and it will not get scratched. However, because the Jet Black finish is so susceptible to scratches you should be extremely careful when applying the Air Jacket. Thoroughly clean the iPhone with a lint free cloth to eliminate any dirt or dust that could be trapped under the Air Jacket and scratch the Jet Black finish. We suggest you use WHOOSH! Screen Shine. When installing the Air Jacket carefully follow the directions enclosed in your package by sliding the top of the iPhone in first, then snapping the bottom, around the home button, into place last.
We have received several questions about the so called “bubblish effect,” and if we anticipate this problem with our cases on the new Jet Black finish for the Apple 7/7 plus. This is not condensation but rather a strange affect caused by placing an extremely hard, smooth, flat plastic surface on another extremely hard, smooth, flat surface, such as the highly polished anodized aluminum surface of the Jet Black finish. This does not happen on other iPhone surfaces because they are not as smoothly finished. As we said this is not caused by condensation and it does not harm the surface of the iPhone. However you may notice this effect when the case is used on some devices with the Jet Black finish.
Apple’s own website recommends using a case to prevent scratches and abrasions to the highly polished surface of the Jet Black finish. A case, even if it eventually exhibits this effect, is better than no case at all. We are currently working on a solution to this problem but we cannot forecast when it will be resolved. This is not a manufacturing defect and we cannot replace cases causing this effect.
We are extremely proud of the new enhancements made in our Air Jacket for the iPhone 7 and we know that you will be pleased.
- New, more Flexible Poly-Carbonate
- Self-Healing Coating
- Full Four Side Protection
- Camera Lens Cut-out
- Exact Fit Design
- Compatible with the iPhone 7 and iPhone 8
- 1 Air Jacket™
Independent feefo Reviews
More Customer Reviews
My encounter to this product is easily get hair line scratch mark on the cover surface after one day use
The description says that it has a self healing back for scratches, and this attracts way more scratches and they're not gone. If you also have a Jet Black one, be prepared for a smudge like effect on the back of your case from the inside from the case sticking
My iPhone 7 shiny black looks great in this case. Also a lot easier to put on and remove compared to the case for the iPhone 6.
Big downside is that some of my non-apple lightening cables do not work now as the cut out for the cable is not big enough. Apple ones work but not decent brand alternatives I have used with my last few phones (these all had power support cases too) do not :-(
Good case, only my 2m Belkin power cable won't fit cause the case is to small by the power entrance.... such a shame