Power Support’s Hybrid Anti-Glare™ Film was a big hit with the iPhone SE 5s/5c/5 and now there is a new, improved, 40% thinner Hybrid Anti-Glare™ Film for the iPhone 6s/6. Our Hybrid Anti-Glare™ Film is a new type of screen protector made from a mixture of glass and resin without using PET (polyethylene-terephthal) chemicals. This advanced formulation results in an exceptionally tough, extremely thin, scratch resistant surface. In fact our Hybrid Anti-Glare™ Film has the same 9H Hardness rating as tempered glass. The advanced formulation makes a strong, hard surface while actually eliminating a layer found in earlier films resulting in a screen that is an incredible 0.2 mm thin! Most tempered glass screen protectors are a rigid 0.3 to 0.5mm thick making our Hybrid Anti-Glare™ Film 50 to 70% thinner than tempered glass screen protectors. Some tempered glass is so thick our competitors include a Home Button button to fill in the deep hole over the Home Button. That is too thick! The special formulation and extreme thinness means the film is as flexible as our regular film making it easier to apply to your iPhone 6/6s using our Rip In Place (RIP)™ technology (see below.) To put it another way, if you bend tempered glass it cracks and breaks. If you drop tempered glass it shatters. Our Hybrid Anti-Glare™ Film is shatter proof.
The special formulation also makes the Hybrid Anti-Glare™ Film extremely translucent while resisting glare and hot spots from lights and the sun. This means the images are sharper and the colors are more vivid. There is actually less material between your eyes and the iPhone screen resulting in better visibility, even when you are wearing Polarized sunglasses. There is also less film between your fingers and the iPhone screen resulting in excellent responsiveness.
The surface of the Hybrid Anti-Glare™ Film protects the iPhone 6s/6 screen from scratches, dirt and dust while reducing fingerprints and smudges. This does not mean it is impossible to get a fingerprint on the screen. It means that the dirt and oils found naturally on your fingers and hands do not adhere to or penetrate the hard coating of the film making it easy to clean. The anti-glare surface treatment reduces hot spots and reflections resulting in spectacular image quality, sharp images and bright vibrant colors.
Power Support’s new Hybrid Anti-Glare™ Film Set for the iPhone 6s/6 provides the tough, hard protection of tempered glass in a thin, flexible, clear screen protection film.
- 0.2mm thin
- H9 Hardness rating
- No PET chemicals
- Easy Application with RIP technology
- Higher Translucency than tempered glass film
- Sharp clear image
- Extremely responsive screen
- 1 Hybrid Anti-Glare™ Film
- 1 Micro fiber cleaning cloth
- 1 Dust remover
- 1 Film Remover
Rip In Place (RIP)™ screen protector application
Our Rip In Place (RIP)™ screen protector application technology is designed to help you cleanly and accurately apply the screen protector. You will notice there are two notches in the film's backing. This backing has been molecularly designed to rip in a straight line and produce no dust or fine particles. Now you can line up the screen protector and secure it in place before attaching the entire film on to the screen.
Always attach new Power Support screen protector film in a clean, dust free environment.
Using the provided cloth, carefully remove dirt and dust from the iPhone screen surface.
Remove the backing from the Dust Remover and apply the sticky side to the iPhone glass surface. Peel off the Dust Remover and lift off residual dust and dirt from the galss screen.
Pick up the film and find the two cuts or notches along the side of the film backing.
Remove the center portion of the film backing from the film to expose the adhesive.
Placing the adhesive side down align the film wiht the screen surface and slowly apply the center portion of the film onto the iPhone glass.
While holding down the center portion of the film, slowly remove the upper portion of the film backing while applying the film to the iPhone glass surface.
Finally, while holding down the upper portion, slowly remove the lower film backing and apply the remainder of the film to the glass surface. Press out any air bubbles as you proceed.
Trapped dust and air bubbles
Trapped air bubble can be gently pushed to the edge of the film with your fingers and the included micro fiber cleaning cloth. Most bubbles will work themselves out in 24 to 48 hours.
Trapped dust and dirt particles can be removed by lifting up the corner of the film closest to the dust speck. Use the enclosed film remover or use a piece of tape, such as scotch tape. Press the tape on the top of the film and carefully lift. Using another piece of tap lift the dust up off the screen or the back of the film.
To remove the film, slide the separately included film remover between the screen protector and the iPhone screen, lift and remove the screen. You may need to try different corners till you find one that you can lift.